Introduction, Packaging contents, System requirements – StarTech.com SATSASBAY3BK User Manual
Page 4
Instruction Manual
1
Introduction
The SATSASBAY3BK SAS/SATA Backplane offers an easy-to-use and cost-effective SATA
hot swap solution and features a sturdy and compact 3-in-2 design that lets you install
up to three 2.5”/3.5” SATA or SAS hard drives into only two 5.25in bays.
With support for SATA/SAS HDD speeds up to 6.0 Gbps, the mobile rack/backplane
is fully compatible with RAID installations to ensure maximum performance and
versatility for enhanced storage applications.
Packaging Contents
• 1 x 3 Drive Backplane
• 3 x 7-pin SATA cables
• 1 x Screw Kit
• 1 x Instruction Manual
System Requirements
• Computer chassis with 2 adjacent 5.25” front bays
• 3 available SATA/SAS ports on the hard drive controller
• 2 available LP4 molex or 2x 15-pin SATA power connectors on the power supply