Cobra Electronics XRS 9545 - Manual (Page 10)

Radar Alert Settings
(continued)
Settings
Intro Operation Customer
Assistance Warranty
Notice
Secondary Icons
Your Detector
Nothing Comes Close to a Cobra ® 15
Settings
Intro Operation Customer
Assistance Warranty
Notice
Secondary Icons
Your Detector
14 English
Dim Button
Press and hold for four seconds
Spectre I & IV+
and VG-2 On
Spectre
& VG2
On
Spectre I & IV+
and VG-2 Off
Spectre
& V G 2
O f f
To Turn VG-2 and Spectre I & IV+ Alerts On and Off
While no signal
is being detected,
press and hold the
Dim button for
four seconds. Tone Voice Visual Display
On = Two Beeps Spectre VG-2
On Spectre & VG2 On blinks
in the display
Spectre VG-2
Off Spectre & VG2 Off blinks
in the display Off = One Beep
To Turn K Band On and Off
While no signal
is being detected,
press and hold both
the Mute and City
buttons for
four seconds. Tone Voice Visual Display
K On = Two beeps K On K On blinks in the display
To Turn Ku Band* On and Off
While no signal
is being detected,
press and hold the
City button for
four seconds. Tone Voice Visual Display
Ku On = Two beeps Ku On Ku On blinks in the display
K Off blinks in the display K Off = One beep K Off
Ku Off Ku Off blinks in the display Ku Off = One beep
VG-2 and Spectre I & IV+ Alert Settings
Police use radar detector detectors (RDDs) to spot users of radar detectors.
Your detector is able to identify signals from VG-2, Spectre I and Spectre IV+
RDDs and can provide alerts when any of these or similar devices are in use
near your vehicle.
Your detector can be spotted by Spectre IV+ RDDs, but is invisible to VG-2 and
Spectre I RDDs. You can choose whether you want to be alerted to VG-2 and
Spectre I & IV+ RDD signals. The factory setting for VG-2 and Spectre I & IV+
alerts is Off.
Pop Alert
The Pop Mode Radar Gun is a single-pulse Doppler radar that is a feature
of a K and Ka (Bee III Ka radar gun) band Instant-On radar gun. It uses
a single, short-time pulse to measure the target vehicle’s speed.
The Pop mode receiver senses Pop singles beyond the effective range of
Pop radar guns. As the Pop mode receiver is so sensitive, you should limit
the use of Pop Detect mode to highway and rural driving.
Pop Alert will alert you to Pop radar signals. During the alert, the unit
continues to detect other signals. The factory setting is Pop Detect Off.
To Turn Pop Alert On and Off
While no signal
is being detected,
press and hold both
the Dim and City
buttons for
four seconds. Tone Voice Visual Display
Pop On = Two beeps Pop On Pop On blinks in the display
Pop Off Pop Off blinks in the display Pop Off = One beep
Radar Alert Settings
The detector allows you to choose whether it will show alerts on the X, K,
and Ku Bands. The factory settings are: X Band and K Band On; Ku Band Off.
To Turn X Band On and Off
While no signal
is being detected,
press and hold both
the Dim and Mute
buttons for
four seconds. Tone Voice Visual Display
X On = Two beeps X On X On blinks in the display
X Off X Off blinks in the display X Off = One beep