StarTech.com R300WN22MO5E - Manual (Page 10)

Instruction Manual
5
5. Once the AP reboots into your desired mode, re-connect to the web interface.
6. Select System -> Setup Wizard to go through the basic configuration for that mode.
Available screens and settings will vary, depending on the mode selected.
AP Mode Setup
LAN Setup – Configure your desired IP Address settings for the LAN interface of the AP,
then click Next.
Note: If you change the default IP address, use the new address to connect to the web
interface going forward.
DNS – Configure a primary and secondary DNS server, if desired, then click Next.