Studiologic Sledge 2.0 Quick Guide - Manual (Page 2)

SLEDGE 2.00
2
Auto Dual mode: the feature allows to play 2 sounds and the same time and is
controlled by a new page (n°5) of the Global, set ON at default; to enable or disable
the function, rotate the VALUE encoder to set the function OFF or ON.
To create a DUAL SOUND, keep played keys on the keyboard (one key for
entering in Split mode or more keys for Layer mode) and select a new sound with the
keypad or the rotary encoder (ref: note). The new sound will become the Upper
(either in Split or Layer mode) and will be at the right of the split point or “above” the
Lower sound for all keys.
Panel & Effects the panel will be active on the Upper sound and the last selected
Effects (of the Upper sound) will also be processing the Lower sound, in combination.
Split point set : the single note kept played when selecting the Upper sound will
also be the split point for that sound combination.
note: using the keypad to enter the new sound (with the related program change) is
a faster and highly recommended procedure, since changing in sequence more than
approx. 10 sounds can also modify the lower sound)
When the function is activated (for instance: sound 002 is selected while keeping a
note with sound 001) the display will show this kind of configuration, in order to give
all needed information on the Dual Sound parameters
Program change and name of Upper sound
Upper sound Lower S=Split category
category p.change L=Layer search
Store Dual Sound: Dual sounds combinations can be permanently stored in any
available presets, simply following the standard Store procedure, pressing Store and
selecting the program change position where you want to store the dual sound.