Studiologic Numa Nano - Manual (Page 12)

i n s t r u c t i o n m a n u a l
12
i n s t r u c t i o n m a n u a l
English
NUMA by Studiologic® 13
Edit Mode Part 5
Patch Name
This page (Image 28) is for renaming patches. Select the letter
in the patch name you want to change with the Function
Keys
v and w . Then choose a New letter with the Virtual
Dial. Function Key u (cap) switches between small and
capital letters. When you´ve finished the entry, choose Yes
( x ). Confirm the upcoming security query with Yes and
that‘s it.
Note: No extra store command necessary.
System
Here you can adjust all common parameters to your personal
needs (Image 29).
LCD Contrast controls the contrast of the display in a range
from -64 up to +64.
The
Dial Sensitivity (1-10) is for the sensitivity of the Virtual
Dial ¢ . Parameter Dial Velocity (1-20) controls the speed of
the Virtual Dial ¢ .
ATTENTION: Touching pad Reset u brings the whole system
back to factory start. All your settings and patches are
erased - irrevocably!!
Touching PC starts a USB connection between the NUMA
keyboard and a computer. There are two different modes:
USB Connection - Midi (Image 30)
Transferring MIDI Data from the PC to the MIDI port of
the NUMA
USB Connection - VCom (Image 31)
This enables a communication between NUMA and PC
with the software „Interactive NUMA“. Possibilities range
from backup/restore to editing patches and shapes in
realtime.
PC Monitor and Keyboard can be used instead of the
NUMA display and capacitive keys.
Restore w enables a restart under factory condition without
erasing user patches and shapes (Image 29).
Touching Store x saves all your system changes to memory,
including the patch that comes up when you turn the NUMA
on. This is the patch you started the Edit Mode from (Image 29).
•
•
Image 29
Image 28
Image 31
Image 30