Tv installation – rear panel connection diagrams – SunBriteTV SB-6570HD User Manual

Page 15

Advertising
background image

SunBriteTV Model 5570HD and 6570HD Operator’s Manual

Page 15

TV Installation – Rear Panel Connection Diagrams

CONNECTING TO A SATELLITE OR CABLE SET-TOP BOX (Continued)

1. Make sure the power of the TV and your DVD player is

turned off.

2. Obtain an S-Video Cable. Connect the S-Video connector

to both your DVD player and Composite’s S-Video

connector port off the back of your TV.

3. Obtain a RCA Audio Cable. Connect the white color

connector to both your DVD player and Composite’s

white connector port off the back of your TV.

4. Connect the red color connector to both your DVD player

and Composite’s red connector port off the back of your

TV.

5. Turn on the TV and your DVD player.
6. Use the remote control’s source button or the source

button on the right side of the TV to switch to AV1

(S-Video).

Please Note :
1. If AV 1 is already occupied, use AV 2 as your connection

port and switch source to AV 2 (S-Video).

2. Refer to the set-top box’s manual to make sure the set-top

box is configured to output correctly to the TV.

3. This model supports SONY’s universal remote code. If

SunBriteTV is not listed, please look up SONY’s codes in

your universal remote’s hand book.

4. This TV will turn off automatically if there’s no signal

present for more than 15 minutes.

1. Make sure the power of the TV and your DVD player is

turned off.

2. Obtain a Yellow Video Cable. Connect the Yellow Video

connector to both your DVD player and Composite’s Yellow

Video connector port off the back of your TV.

3. Connect the white color connector to both your DVD player

and Composite’s white connector port off the back of your

TV.

4. Connect the red color connector to both your DVD player

and Composite’s red connector port off the back of your TV.

5. Turn on the TV and your DVD player.
6. Use the remote control’s source button or the source button

on the right side of the TV to switch to AV1 (CVBS).

Please Note :
1. If AV 1 is already occupied, use AV 2 as your connection port

and switch source to AV 2 (S-Video).

2. Refer to the set-top box’s manual to make sure the set-top

box is configured to output correctly to the TV.

3. This model supports SONY’s universal remote code. If

SunBriteTV is not listed, please look up SONY’s codes in your

universal remote’s hand book.

4. This TV will turn off automatically if there’s no signal present

for more than 15 minutes.

Connecting with S-Video (Fair)

Connecting with

Composite (Fair)

Advertising
This manual is related to the following products: