Sunny Health & Fitness SF-B1001S - Manual (Page 6)

5
Step C:
Lock the Saddle (7) on the Seat slider (6) tightly
with wrench.
Adjust the front & back distance of Seat slider (6),
then lock the Seat slider (6) on the Seat post (5)
tightly with Pop-pin knob (8).
Insert the Seat post (5) to the rear upright tube of
Main frame (1), then adjust the height properly and
lock them tightly with Pop-pin knob (8).
Note: You could adjust the front & back distance of
Seat slider (6) by loosing properly the Pop-pin knob
(8) on Seat post (5); you could also adjust the
height of Seat post (5) by loosing properly the
Pop-pin knob (8) on the rear upright tube on Main
frame (1).
Make sure the Saddle (7) is locked tightly on Seat
slider (6) before moving.
Step D:
Attach the Pedals (9L/R) to the Cranks (10L/R)
respectively, viewed from the rider’s seated
position.
Note: Both pedals are labeled, L FOR LEFT
and R FOR RIGHT.
Important:
To tighten，turn the left pedal
COUNTERCLOCKWISE and the right pedal
CLOCKWISE.