Canon LV-7355 LV-7350 - Manual (Page 35)

35
SETTING
Ceiling
When this function is “On,” the picture is top / bottom and left / right
reversed. This function is used to project the image from a ceiling
mounted projector.
Rear
When this function is “On,” the picture is left / right reversed. This
function is used to project the image to a rear projection screen.
Ceiling function
Rear function
Keystone
When the image is distorted, select Keystone. ON-SCREEN MENU
disappears and Keystone dialog box is displayed. Correct keystone
distortion by pressing POINT UP/DOWN button(s). Refer to
KEYSTONE ADJUSTMENT on page 20.
SETTING MENU
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button(s) to move a red frame pointer to
SETTING icon. 1
2
Language
Language used in ON-SCREEN MENU is selectable among English,
German, French, Italian, Spanish, Portuguese, Dutch, Swedish,
Chinese, Korean, and Japanese.
Display
This function decides whether to display On-Screen Displays.
On ··· shows all the On-Screen Displays.
Off ···· sets On-Screen Displays disappeared except;
● ON-SCREEN MENU
● “Power off?” message
● P-TIMER
● “No signal” message
● “Wait a moment!" message
Set the red frame
pointer to the item and
press SET button.
Press POINT DOWN button to move a red frame pointer to the
item that you want to set and then press SET button. Setting
dialog box appears.
Blue back
When this function is “On,” the projector produces a blue image while
input signal is not detected.
Logo
When this function is “On,” the projector displays our logo when
starting up.
When pressing SET button
at Language, Language
Menu appears.
Move the pointer to the item
and then press POINT
LEFT/RIGHT button(s).
SETTING MENU
SETTING Menu icon