Sure Heat 2006 Amana AM33 - Manual (Page 15)

STEP EIGHT
a. Remove two screws from the burner valve
assembly.
b. Carefully insert the valve assembly into the cast
burner. You will need to angle the tube into the
burner assembly. Make certain that the hose is
pointing down when the valve is put in place.
Then push the valve stem out through the
opening in the front of the side burner shelf
assembly, lining up the holes on the valve
assembly with the openings on the burner shelf.
c. Place bezel into place, with the "off" position
pointing up, making sure to line up holes.
d. Attach bezel to assembly face with screws removed
in step 8a.
e. Press knob onto valve assembly stem.
SS 5 Assembly
15
8d
8c
8b
8e
close-up of step 8b