Sure Heat FS87PHLP Patio Heater - Manual (Page 10)

Assembly Process
10
Step 5 - Attach Reflector Studs to Screen Cover
Insert 3 Reflector Studs & 3 large Flat Washers.
Tighten studs securely.
3 Reflector Studs 3 Large Flat Washers
Step 6 - Attach Head Assembly to Post
4 Small Bolts Head Assembly
Insert hose end into the top of the post and then
rest the burner head assembly onto the post
making sure that the control knob is positioned
above the lighting instructions on the post.
Attach Head Assembly to post, and loosely install
four small bolts.Tighten bolts securely.
Remove 4 small bolts from the top of the Head
Assembly .