Sure Heat 2008 Amana AM33 Natural Gas Conversion Kit - Manual (Page 6)

24. Reattach the flex line from the manifold onto the side
burner valve assembly. (See Fig. 24)
Fig. 21
Fig. 22
Fig. 23
Fig. 24
Fig. 20
AM33 LP-P Natural Gas Conversion Instructions
20. Hold the elbow and use a wrench to remove the rear IR
burner orifice. Replace it with the supplied NG orifice
and use the six screws removed in step 18 to secure the
rear IR burner cover and wind shield in position.(See
Fig. 20)
21. Remove the two (2) screws securing the bezel and
side burner valve in position on the right side shelf,
then remove the side burner valve. Replace it with the
supplied NG side burner valve and reattach the bezel
with the two (2) screws removed. (See Fig. 21)
NOTE: Make sure the “ OFF” position on the bezel
is facing up .
22. Attach the right side burner shelf by inserting the four (4)
screws on the right side of the grill head into the holes
on the right shelf. Then tighten all the four (4) screws
and install the self-tapping screw at the slotted hole on
the front bottom corner of the right side burner shelf.
(See Fig. 22)
23. Attach the left side shelf by inserting the four (4) screws
on the left side of the grill head into the holes on the
left side shelf. Then tighten all the four (4) screws and
install the self-tapping screw at the slotted hole on the
front bottom corner of the left side shelf. (See Fig. 23)