SUUNTO AMBIT2 S User Guide - Manual (Page 102)

• Toggle: The backlight is switched on when you press [Light
Lock]. It stays on until you press [Light Lock] again.
o
Brightness: Adjust backlight brightness (percentage).
• Display contrast: Adjust the display contrast (in percentages).
Compass
• Calibration: Start compass calibration.
• Declination: Set the compass declination value.
Map
• Orientation
o
Heading up: Displays the zoomed-in map with the heading
pointing up.
o
North up: Displays the zoomed-in map with the north
pointing up.
NOTE: The alarm will sound even when all tones are off.
PAIR
• Bike PODs: Pair a bike POD.
• Power POD: Pair a power POD.
• HR belt: Pair a HR belt.
• Foot POD: Pair a foot POD.
• Cadence POD: Pair a cadence POD.
14.1 Service menu
To access the service menu, keep [Back Lap] and [Start Stop] pressed
simultaneously until the watch enters the service menu.
102