Chamberlain Series 1200 User Manual
Garage door opener, Owner's manual
Advertising
Garage Door Opener
For Residential Use Only
(Model Series 1200 - Canada )
Model 1260 - 1/2HP
Model 1250 - 1/3HP
Model 1255 - 1/2HP
Model 1245 - 1/3HP
®
Owner's Manual
■
Please read this manual and the enclosed safety materials carefully!
■
Fasten the manual near the garage door after installation.
■
The door WILL NOT CLOSE unless the Protector System
®
is connected and
properly aligned.
■
Periodic checks of the opener are required to ensure safe operation.
■
The model number label is located under the light lens on the front panel of
your opener.
Advertising
Table of contents
Document Outline
- Owner's Manual
- CONTENTS
- Safety alert symbols
- You'll Need Tools
- Sectional Door Installation
- One-Piece Door Installation
- Opener Carton Inventory
- ASSEMBLY SECTION
- INSTALLATION SECTION
- 1) Determine Header Bracket Location
- 2) Install the Header Bracket
- 3) Attach the T-rail to the Header Bracket
- 4) Position the Opener
- 5) Hang the Opener
- 6) Install the Door Control
- 7) Install the Light(s) and the Lens(es)
- 8) Attach the Manual Release Rope and Handle
- 9) Electrical Requirement
- The Protector System ®
- 10) Install the Safety Reversing Sensor
- 11) Fasten Door Bracket
- 12) Connect Door Arm to Trolley
- Adjustment Section
- 1) Adjust the UP and DOWN Limits
- 2) Adjust the Force
- 3) Test the Protector System ®
- 4) Test the Safety Reverse System
- SAFETY INSTRUCTIONS
- Care of Your Opener
- Maintenance Schedule
- Receiver and Remote Control Programming
- Having a Problem?
- Repair Parts
- Accessories
- Index
- HOW TO ORDER REPAIR PARTS
- LIMITED WARRANTY