Setting the units, Setting the tank pressure alarm, 44 5.7.9. setting the tank pressure alarm – SUUNTO COBRA3 User Guide User Manual
Page 44
Advertising

ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
5.7.8. Setting the units
In the Unit settings you are able to choose between metric (meters/Celsius/bar) and
imperial (feet/Fahrenheit/psi) units.
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
5.7.9. Setting the tank pressure alarm
The tank pressure alarm can be set "ON" or "OFF" and in the range of 10–200 bar.
The alarm is the secondary cylinder pressure alarm point. The alarm is activated when
the tank pressure drops below the set limit. You can acknowledge this alarm.
The 50 bar/700 psi alarm, however, is fixed and cannot be changed. You cannot ac-
knowledge this alarm.
44
Advertising