SUUNTO Core - Manual (Page 15)

● You start or stop the log recorder
● You mark an altitude point while you are recording logs
● You start or stop the stopwatch
● The device switches between the ALTIMETER and BAROMETER profile
when you are using the AUTOMATIC profile.
To turn tone guides on or off:
1. In GENERAL , select TONE GUIDES .
2. Switch the tone guides on or off with [+] and [- Light].
5.3.3 Backlight
In BACKLIGHT you switch between two different light features: any button and
light button.
To set the backlight to normal or night use:
1. In GENERAL , select BACKLIGHT .
2. Switch the backlight between LIGHT BUTTON and ANY BUTTON with [+]
and [- Light].
When LIGHT BUTTON has been selected, you can activate the backlight with [-
Light]. The backlight is turned off automatically after 5 seconds. If you want to
see the backlight when you are in the
MENU , you need to activate it in the TIME ,
ALTI & BARO or COMPASS mode before entering the MENU . The backlight will
then be activated until you exit MENU .
When ANY BUTTON has been selected, the backlight is activated every time you
push a button.
5.3.4 Language
In LANGUAGE you choose the language of your Suunto Core user interface
(English, German, French or Spanish).
15
en