SUUNTO DX - Manual (Page 63)

5.8.9. Setting the sample rate
The Sample Rate setting controls how often the depth, tank pressure (if enabled), and
water temperature is stored in the memory.
The factory default setting is 20 seconds (user selectable to 10, 20, 30, or 60 s).
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
5.8.10. Setting the deep stops
In the DIVE AIR mode in the Deep Stops setting mode, the Deep stops can be set
“ON” or “OFF” depending on whether the Deep stops are used or not. In the MIXED
and CCR mode(s) the Deep stops are always set ON.
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
64