SUUNTO Elementum Ventus User Manual
Page 6
Advertising

COMPASS
• Press [C] to enter.
• Keep [C] pressed to start the compass calibration.
• While calibrating compass, keep the device level and stabile when
rotating. ‘Level’ blinks on the display if the device is not level or
stabile.
• Press [B] or [C] to exit compass.
SETTINGS
1. In
time
mode, keep [A] pressed to enter/exit
settings
.
2. Rotate [A] to change the values.
3. Press [A] to accept.
4. Press [B] or [C] or keep [A] pressed to exit.
BACKLIGHT
Keep [B] pressed to activate the backlight.
NOTE: To save power, backlight blinks when used in COMPASS view.
TIME/SAILING
Press [B] to switch between
time
and
sailing
mode.
BUTTON LOCK
Press [A] and [B] at the same time to activate/open button.
Advertising