Carrier Access CMG Router - Manual (Page 179)

CMG Router - Release 2.7 6-5
Basic Configuration
Routing Protocol/Security
Routing Protocol/Security
Page Fields
Direction(s) for LAN Network Updates
Selection is: < Both>, <Neither>, <Send>, <Receive>. Default is Neither.
RIP mode to be received from remotes
Selection is: <RIP1>, <RIP2>, <RIP1/RIP2>. Default is RIP 1.
RIP mode to send to remotes
Selection is: <RIP1>, <RIP2>, <RIP1/RIP2>. Default is RIP 1.
Protocol remotes will use to authenticate local LocalUnit
Selection is: <CHAP>, <PAP>, <NONE>. Default is None.
Change the CHAP Secret LocalUnit will send?
Note: this field displays only with a selection on <CHAP>
Selection is: <YES>, <NO>. Below the current Secret Password is listed.
If <YES> is selected, the operator will be requested to enter in a new password, and retype this
password to confirm.