Casio fx-9750G PLUS - Manual (Page 214)

186
5. Change the range settings.
cw J
• If you want to change the Dynamic Graph
speed, press 3 (SPEED).
You can set the Dynamic Graph speed to any one of the following settings.
Stop & Go: Each step of the Dynamic Graph draw operation is performed
each time you press w.
Slow: 1/2 Normal
Normal: Default speed
Fast: Double Normal
1. Use f and c to move the highlighting to the speed you want to use.
2. Press 1 (SEL) to set the highlighted speed.
u u u u u
To start the Dynamic Graph draw operation
There are four different variations for Dynamic Graphing.
k k k k k
10-time Continuous Drawing
Select “ Stop” as the draw type (Dynamic Type) to perform 10-time continuous
drawing. With this drawing style, 10 versions of the graph are drawn and then the
draw operation stops automatically.
Example To use 10-time continuous drawing to draw the same graph
that you drew in the previous example (page 184)
1. Display the coefficient menu. Next, display the set up screen and specify
“ Stop” for Dynamic Type and then press J.
2. Start drawing of the Dynamic Graph.
6(DYNA)
↓
13 - 3
Drawing a Dynamic Graph
1 2 3 4 5 6
P.188
P.7