SUUNTO Vyper - Manual (Page 40)

5.6.1. Setting the personal/altitude adjustments [1 AdJ MODE]
The current Altitude and Personal Adjustment settings are displayed in the startup
screen when diving at the surface. If the mode does not match the altitude or personal
conditions (refer to Section 5.7.4. Diving at altitude and Section 5.7.5. Personal adjust-
ments), it is imperative that you enter the correct selection before diving. Use Altitude
Adjustment to select the correct altitude and use Personal Adjustment to add an extra
level of conservatism.
To enter the Altitude Adjustment and Personal Adjustment Setting mode, select MODE-
3 SET- 1 SET DIVE- 1 AdJ MODE. Now you are able to select from the three altitude
modes and the three personal modes.
Figure 5.1. Setting Altitude adjustment and Personal adjustment. Press the scroll
buttons to change the altitude mode.
40