SUUNTO VYTEC - Manual (Page 18)

16
In case the transmitter battery is running low, a low battery warning “LOBT”
will be transmitted and displayed intermittently with the pressure reading
on the Vytec (Fig.2.6 d).
If the dive is started without that the Vytec and the transmitter have
been properly paired, the Vytec will indicate that no cylinder data is
available by displaying “OFF” (Fig. 2.6 e).
TABLE 2.1. PRESSURE TRANSMISSION RELATED DISPLAYS
Display Indication Figure 2.6
SETC No code stored, set code a
- - - Pressure reading over 360 bar [5220 psi] b
FAIL Indicates pressure reading has not been
updated in more than 1 minute c
LOBT Indicates pressure transmitter battery voltage d
is low. Change the transmitter battery!
OFF Pairing has not been conducted before e
start of dive. No cylinder data available.