TC-Helicon Ditto Mic Looper - Reference Manual - Manual (Page 2)

Ditto Mic Looper English Manual – 2014-11-17 a
Important safety instructions 1
EMC/EMI 2
Explanation of graphic symbols 2
About this manual 3
Introduction 3
Setup 4
Inputs, outputs, controls 8
1. Power input 8
2. MIC jack – Microphone input 8
3. OUT jack – Audio output 8
4. LOOP footswitch 8
5. STOP footswitch 8
6. LOOP LEVEL control knob 8
7. USB port 8
Creating loops 9
Frequently asked questions 11
Footswitch LED state reference 11
Updating the firmware 11
Technical specifications 12
Getting support 12
Product Ditto Mic Looper
Product (firmware) version 1.0
Document English Manual
Document version / date 2014-11-17