TeeJet 844 Sprayer Control - Manual (Page 15)

CONNECTING SYSTEM COMPONENTS
TO THE CONTROL CONSOLE
Two cables are provided to connect the sprayer control components to the
Control Console:
■ The “Sensor” Cable provides connections to the Flow meter or Pressure
Transducer, and Wheel Speed Sensor or Radar Speed Sensor.
■ The “Valve” Cable provides connections for the Pressure Regulating Valve and
the Boom Control Valves.
Both have a large plug on one end and lead connectors for individual valves or
sensors on the other end.
All cable connectors are unique or specific to each control component. This
eliminates the possibility of connecting the wrong cable lead to a component.
13
F IGURE 9
W IRING D IAGRAM
844 SPRAYER CONTROL
TANK
POWER
+ –
JET AGITATOR
SPEED SENSOR
SOLENOID VALVES
BOOM SECTIONS
STRAINER
TANK SHUT-OFF
CENTRIFUGAL
PUMP
AGITATOR
VALVE
PRESSURE
TRANSDUCER
(IF USED)
PRESSURE
REGULATING
VALVE
10-12˝
(25-35 CM)
5-7˝
(12-17 CM)
FLOW METER
(IF USED)