TeeJet LH 500 - Manual (Page 10)

O VERVIEW LH 500 C OMBINE MONITOR OPERATORS MANUAL
ESCAPE KEY (POS. 6)
Key Description
Esc
Use this key to return to the previous menu without saving the
value.
CLEAR KEY (POS. 7)
Key Description
C
The clear key is used to reset settings/counters and to clear
warnings.
FUNCTION KEYS (POS. 8)
Key Description
key 1 - 4
The function of these four keys is shown in the display directly
above the key and will change depending on which mode the
computer is in (soft-keys).
A description of the main operating functions these keys represent
can be seen on page 13
SIEVE LOSS INDICATOR BAR (POS. 9)
The sieve loss indicator bar shows an indication of grain loss measured by the
sensor over the sieves in percent of the calibrated range. The higher the black bar
the greater the loss and the lower the black bar the lower the loss.
Grain loss over the sieves normally means incorrect fan speed or possible
blockages.
Make a habit of starting with too much air on the sieves (higher fan speed) as it is
easier to reduce the fan speed until the grain loss level is acceptable than it is to
increase the fan speed until loss appears. Combine capacity is reduced when the
fan speed is too low.
GRAIN TANK LEVEL INDICATOR (POS 10)
The grain tank level indicator shows, in four steps, how much grain is in the grain
tank.
10 LH A GRO