TeeJet CenterLine v1.07 - Manual (Page 11)

CenterLine
Software Version 1.07
CenterLine 5
Introduction
Menu Items Next and To Start
There are two additional menu items that are found in almost every menu; <NEXT> and <TO
START>. Figure 3 shows the <NEXT> and <TO START> menu items in the System Setup menu
list. Pressing Enter at <NEXT> brings up the next menu heading. As an example, pressing Enter
at <NEXT>, while in Lightbar setup, brings up <SYSTEM>. In the same example, pressing ESC at
<NEXT> brings up the <LIGHTBAR> menu Item. Selecting <TO START> automatically goes back
to the <START> menu. From here real-time guidance can be started. Using <TO START> is useful
when it is necessary to quickly change one setting and then go right back into real-time operation.
Software Components
CenterLine software can be broken into three components: Setup (See “CenterLine Setup” on
page 13), Real-Time (See “CenterLine Real-Time Operation” on page 32), and Tools (See “Tools”
on page 29). Setup allows the configuring of the CenterLine to best suit the current needs, and the
Real-Time component handles all of the real-time guidance operations. The Tools component pro-
vides basic diagnostics for the lightbar and the attached GPS receiver.
Figure 3: Next and To Start Menu Items