System setup, Figure 29: system setup, Table 12: system menu item default settings – TeeJet CenterLine v1.10 User Manual
Page 31: Units, Figure 30: setting system units
CenterLine
Software Version 1.10
CenterLine 27
CenterLine Setup
System Setup
System setup allows the selection of settings that effect the entire CenterLine product. There are
only two settings: Units and Language (See Table 12).
Units
System Units allows the selection of either US and Metric units (See Table 13).
To change the System Units, enter System Setup, scroll through the sub-menu list until <UNITS>
appears in the text window, and press Enter. Next scroll between the two units choices, <MET-
RIC> and <US>. When the desired unit is displayed, press the Enter key. The software should
bring you back to <UNITS>.
Figure 29: System Setup
Setting Name
Default Value
Change at 1st
Time Start Up
Unit
US
Optional
Language
English
Optional
Table 12: System Menu Item Default Settings
Figure 30: Setting System Units