TeeJet Swath XL SmartPad II - Manual (Page 141)

SmartPad II
Software Version 4.03
Chapter 4 - Waypoint Navigation 4-5
Lightbar Setup
Lightbar Setup
The Lightbar Setup process is accessed from the Nav 2 Point Setup Menu. There are five lightbar menu items associ-
ated with the Lightbar Setup process; Use Lightbar, LED Brightness, Alarm, Alarm Range and Display Message.
To access the Lightbar menu page, highlight the Setup menu item in the Nav 2 Point Main menu page and press .
This takes you to the Setup menu page, see Figure 4 -4. Within the Setup Menu select the Lightbar menu item using
the arrow keys . Press to enter the Lightbar menu page. Once in the Lightbar menu page, you can change
any of the Lightbar menu items by highlighting the desired menu item and pressing .
Figure 4-4: Accessing Lightbar Setup from the Main Menu