TeeJet Matrix 840G User Manual - Manual (Page 34)

www.teejet.com
54
●
Figure 2-75: Example of Deadband Adjustment
Lookahead
Lookahead is used during Straight A-B Guidance
mode to adjust the vehicle’s approach to the
guideline. Fine tune the Lookahead by conducting
several approaches to the guideline. Range is 0.0 -
10.0 seconds.
1. Press LOOKAHEAD ICON .
2. Press
►PLUS ICON if the vehicle is overshooting
the guideline when approaching.
►MINUS ICON if the vehicle takes too long
to get to the guideline.
3. Press
►CHECKERED FLAG to complete
Confi gure Setup.
►FIELDPILOT SETUP TAB to return to
main FieldPilot Setup.
NOTE: Press & hold PLUS/MINUS ICONS to
quickly adjust settings.
Figure 2-76: Lookahead
Figure 2-77: Example of Lookahead Adjustment