Cambex Bus Adapter - Manual (Page 27)

The message no failover devices available indicates that the
attached storage is not yet recognized by the DPF driver. This
could mean that a platform kit needs to be installed for your
storage or that the storage is not yet configured.
/usr/lpp/cbxfc/runtrace
This should be run to start a trace if Cambex support requests a
trace of the card failure. To stop the trace and generate a trace
report, type:
trcstop; trcrpt > /tmp/trc.log
Questions or problems related to Cambex fibre channel adapters
may be e-mailed to:
[email protected]
25