TeeJet LH 1200 - Manual (Page 7)

LH 1200 O PERATOR & F ITTING M ANUAL G ENEREL USE
LH A GRO 7
SEED DRILL
Type A: Type B:
Work time Work time
Forward speed Forward speed
Area trip counter Area trip counter
Area total counter Area total counter
Shaft speed (RPM) Seed application rate
Seed consumption
The above examples show that three basic functions Work time, Forward speed,
and Area counter are always available. The secondary functions can be selected
as required.
The monitor can measure distance in metres as an extra function. This function
requires a special encodement (code) and can, therefore, only be used by itself.
All other information displayed is incorrect when this function is selected.
When Forward speed is selected and the area override sensor is activated an “r”
is displayed on the left-hand side of the display.
The LH 1200 is equipped with a system test program, which enables the user to
test all connected sensors. For more information, see the ”SYSTEM TEST”
chapter on page 26.