TeeJet FieldPilot Install AGCO GLNRA756-A856 MF9x95 CHNGR670B-680B - Manual (Page 11)

www.teejet.com
9
FieldPilot ®
2. MOunt the FieldPilOt ValVe
The FieldPilot valve will mount to the bottom side of the floor of the cab. Use the FieldPilot valve to mark the
location for drilling the two 7/16” mounting holes. The distance between the holes should be 2.9”. Once the
holes are drilled use parts (B, F, & G) to mount the FieldPilot valve. The valve will mount with the solenoids
facing the left side of the machine and the P & T ports facing forward.
Figure 1-4: Mount the FieldPilot Valve
remove floor mat
View from left side
looking to the right side
B, F & G
F