Fieldpilot, Disconnect here z z u, Mount the counterbalance valve – TeeJet FieldPilot Install Case IH 2x90, 2x94, 3x94 User Manual
Page 14: Install pressure hoses and adapters
www.teejet.com
12
FieldPilot
®
6. Mount the counterBalance ValVe
Use four (4) of
(B)
, two (2) of
(D)
, and two (2) of
(M)
to mount the Counterbalance Valve
(G)
to the bracket
(P)
as shown.
Figure 1-7: Mount the Counterbalance Valve
7. install Pressure hoses and adaPters
The FieldPilot valve will receive pressure from the line that feeds the orbital and then the EF from the
FieldPilot valve will route to the orbital. Disconnect the IN line from the orbital and install the 90° adapter
(Z)
on both the line and the fitting in the orbital. Connect hose
(U)
from the IN line to the P port on the FieldPilot
valve. The hose should route to the right and then around between the engine and cab over to the FieldPilot
valve.
Figure 1-8: Install Pressure Hoses and Adapters
disconnect
Here
Z
Z
U