TeeJet FieldPilot Install Case IH 9150-9250-9330-9350 - Manual (Page 21)

www.teejet.com
19
FieldPilot ®
10. iNStallatiON OF eNGaGe/diSeNGaGe Switch
Connect item (A) to the connector on the SCM harness labeled Remote Engage/Disengage. Install the push
button in a location that is easily accessible during operation of the machine. This switch (A) is not required
if the optional foot switch 32-04020 is used.
Figure 1-13: Engage/Disengage Switch