Fieldpilot, Ntank pressure – TeeJet FieldPilot Install Case MX Magnum User Manual
Page 13
Advertising
www.teejet.com
11
FieldPilot
®
6. install PressUre and tank adaPters
On the tractor steering orbital, the top right line is the tank return port and the lower right line is the pressure
supply. These ports will be stamped P and T respectively on the orbital casting. Remove the hoses from
these two ports on the steering orbital and install run-tees
(N)
provided. Leave the run-tees loose to allow for
alignment when attaching hoses.
Figure 1-7: Install Pressure and Tank Adapters
N
tank
pressure
Advertising