TeeJet FieldPilot Install Case MX Magnum Series - Manual (Page 10)

www.teejet.com
9
FieldPilot ®
iNstAllAtioN
If there are questions concerning the installation of the FieldPilot system on this vehicle, or due to
the changes in component specifications the parts supplied in the kit are not exactly as presented
in this document, please contact your dealer or TeeJet Customer service representative for
clarification before installation. TeeJet Technologies is not responsible for misuse or incorrect installation of
the system.
NOTE: BE VERY CAREFUL TO ABSOLUTELY SECURE ALL CABLES AND HOSES SO THAT THEY
DON’T INTERFERE WITH THE MANY MOVING PARTS OF THE MACHINE!
1. PrePare the FieldPilot ValVe Block
Make sure the FieldPilot valve block (C) is clean and free of dust. Work on a clean bench. Remove the
plastic plugs and install the straight adapters (T) in the A and B ports and the elbow adapters (R) in the P
and T ports. Install adapter (Q) in the LS port.
Figure 1-2: Preparing FieldPilot Valve Block
ls
P
t
B
A
Q
R
R
t
t