TeeJet FieldPilot Install Case SPX 4260b - Manual (Page 13)

www.teejet.com
12
FieldPilot ®
5. install steerinG hoses
Install the steering hoses (I) by connecting the end with the 90° fitting to the branch of the Run Tees and
route the other end to the FieldPilot valve. Connect them to the fittings in the A and B ports.
Figure 1-6: Install Steering Hoses
i
i
6. install the PressUre hose
Install the Pressure hose (J) by connecting the end with the 90° fitting to the fitting in the P port on the
FieldPilot Valve. Route the other end to the branch of Run Tee (M) installed in the orbital P port in Step 4.
Figure 1-7: Install Pressure Hose
J
J