TeeJet FieldPilot Install CAT C-D-E 65-75-85-95E - Manual (Page 19)

www.teejet.com
17
FieldPilot ®
10. install steering disengage switch (kit 91-07011)
Remove the shields to gain access to the steering column in the cab. Glue magnets to the steering shaft
(the magnets will need to be cut in half because the shaft is small). Mount the bracket from kit (V) as shown.
Install the sensor in the bracket. Set the clearance between the magnet and the sensor as close to ⅛″ as
possible.
Figure 1-14: Install Steering Disengage Switch (Kit 91-07011)
remove panel here
sensor
Bracket
Magnet