TeeJet FieldPilot Install Ford NH 8x70 - Manual (Page 11)

www.teejet.com
9
FieldPilot ®
2. PrePare the shuttle tee
Install adapter (V) into the branch of the shuttle tee (R) . Install adapters (W) into both ends of the run of
the tee. Point the (W) adapters in opposite directions.
Figure 1-3: Prepare the shuttle tee
W
W
R
V
3. install the FieldPilot ValVe Bracket
The valve bracket will mount to the vehicle’s frame on the left side. Using the existing hole just below the
Engine Oil Cap, mount the (K) bracket with (1) (H) 5/8” bolt, (1) (J) 5/8” nut and (2) (F) 5/8” washers.
Figure 1-4: Install Mounting Bracket for FieldPilot Valve
K