TeeJet FieldPilot Install Ford Versatile - Manual (Page 19)

www.teejet.com
17
FieldPilot ®
8. install the ValVe cOntrOl caBle
The valve control cable (F) will connect to the FieldPilot valve and route to the back rear corner of the cab.
Figure 1-11: Install the Valve Control Cable
9. install steering disengage switch (kit 91-07011)
The steering disengage kit (Z) is used to automatically disengage FieldPilot when the steering wheel is
turned. The magnets mount on the steering shaft or other rotating part of the steering wheel and the sensor
mounts so that there is a 1/8” clearance between the sensor and magnet.
Figure 1-12: Install Steering Disengage Switch (Kit 91-07011)