The Shrunks Bones Bed Protector Toddler - Manual

The Shrunks
Nylon Bed Cover
Instructions
Corporate
4840 Highlawn Drive
Burnaby BC V5C 3T1 Canada
T. 604-298-0588
F. 1-866-839-1624
Toll Free 1-866-354-2237 USA Logistics & Warehousing
The Shrunks' Family Toy Company Inc
925 Boblett Street
Blaine, WA, 98230 USA
theshrunks.com
1
2
3
4
180
degrees
Inflate bed to approximately 80% capacity. This will
make it easier to fit the Bed Cover. You can inflate
the bed fully at the end, after the Bed Cover is
fitted properly.
Push the outer master valve in, until it sits flush with
the bed.
Stand the bed vertically in front of you. The underside
of the bed should face you.
Hold the Bed Cover from two corners. Place the Bed
Cover over the top two corners of the bed.
Rotate the bed 180 degrees. Pull the Bed Cover over
the remaining two corners.
Adjust fit as needed. Pull Bed Cover down to expose
valve. Inflate the bed fully.
To remove, pull one corner off at a time and fold
for storage.
5
6
7