Tie Down Super Lube Hubs - Manual (Page 3)

Old
Grease
Out
New
Grease In
Out
Rubber
Plug
“Hub”
Hub Grease
Manufactured
by:
Super Lube “Spindle” Lubrication
1. Remove the rubber plug from the grease (hub) cap.
2. Use a standard grease gun onto the grease fitting located at the end of the
spindle, making sure the grease gun nozzle is engaged on the fitting tightly.
3. Pump grease into the fitting, while slowly turning the wheel. Grease will flow out
of the hub around the spindle.
4. When the grease appears to be the new clean grease, remove the grease gun
and wipe off any excess grease.
5. Replace the rubber plug in the cap.
Super Lube “Hub” Lubrication
1. Remove the rubber plug from the grease (hub) cap.
2. Use a standard grease gun pressed onto the grease fitting located behind
wheel/hub, making sure the grease gun nozzle is engaged on the fitting tightly.
3. Pump grease into the fitting, while slowly turning the wheel. Grease will flow out
of the hub around the spindle.
4. When the grease appears to be the new clean grease, remove the grease gun
and wipe off any excess grease.
5. Replace the rubber plug in the cap.