Tii HNP6L-ET - Manual (Page 16)

P/N: 92227001
Rev A 3/07
16
To set the Password of the device, first select the device by clicking on its name in the lower
panel and then click on the EnterPassword button.
In this case Device 2 with MAC address 00:B0:52:08:01:E1 as in Figure 3.
Figure 3
A dialog box will appear as shown in Figure 4 to type the password. The selected device name is
shown above the field for entering the password. Hit OK after entering the password.
A confirmation box will appear if the password was entered correctly. If a device is not found,
the user will be notified and suggestions to resolve common problem swill be presented. See
Figure 5.
Figure 4