TL Audio VTC - Manual (Page 21)

21
In practice the red peak light is activated at a level of +18dB or above,
allowing some advance warning when bringing up the monitor input
gain before the headroom limit of +26dB is reached.
SIGNAL PRESENT (19)
This is a green LED which illuminates to show that a signal is present
on the monitor channel path when it reaches a level of -30dB.
SOLO (20)
The solo button is found at the top of the function button array and in its
default mode acts as a mono PFL (pre fade listen). When the SOLO IN
PLACE function is activated on the Master Section, the monitor channel
solo button will activate the solo in place function instead of PFL. In the
latter mode the monitor channel solo button is linked to both main
channel and monitor channel mute status indicators.
SOURCE-CHANNEL (SRCE-CH) (21)
Routes the channel signal to the monitor, in place of the tape return
signal. Note that this is different from the Flip switch which reverses
channel and tape return signals.
In practice the Source-Channel button may be used to set up two
separate mixes running side by side - one on the main channel faders
and another on the Mix B faders. This can be useful for purposes of
comparison or later editing of separate mixes.
HF/ LF EQ (22)
This button assigns the channel high and low frequency EQ filters to the
Mix B section signal path.
LM/HM EQ (23)
This switch reassigns the channel parametric mid EQ filters to the Mix
B signal path.
Note: Both the above are dedicated monitor channel EQ status
switches
and independent of the main channel EQ On status switch. In practice
this means that even when the EQ switch located on the main channel is
in the ‘off’ position, EQ is still available for the monitor section should
the assign buttons be activated.
STATUS (24)
Although automation is an optional extra, both Status and Auto buttons
are provided for whatever third party system is used. With certain
PAN MIX
B
MUTE
PK
SIG
AUX
1 On
2 On
3 On
4 On
5+6
AUX
3+4 PRE
H - MID
+/-
Hz
Q
+48V
LINE
PHASE
GAIN
FLIP
MON
TRIM
HF
L - MID
+/-
Hz
Q
EQ ON
SOLO
+10
+5 STAT
0
AUTO
-5
-10 SRCE-CH
-20
-30 HF/LF
EQ
-40
-50
-60 LM/HM
-70 EQ
-80
PAN
L R
MUTE
PK
SIG
SOLO
+10
STAT
+5
AUTO
0
BUSS
-5
1+2
-10
3+4
-20
5+6
-30
-40 7+8
-50
-60
-70 L+R
-80
2
1
3
5
7
8
11
14
18
19
20
24
25
21
22
23
29
30
31
32
33
34
40
4
6
9
10
12
13
15
16
17
26
27
28
35
STEREO AUX
PAN 7/8
LEVEL
On
PRE
MIX B