TL Audio 5050 - Manual (Page 21)

10Hz to 40KHz, +0, -1dB.
Noise:
-80dBu, 22Hz to 22KHz, line input selected at 0dBu input and
output gain.
Dynamic Range:
100dB (Line input @ 0dB gain).
Power Requirements:
Internally set for 220-240V 50Hz or 110-120V 60Hz operation.
Rear panel fuse 20mm, 1AT, 250V.
Power consumption 20VA typical.
Detachable 3 pin IEC connector, mating connector and cable
supplied.
Front panel On/Off switch with green LED.
Dimensions:
19” rack mounting, 2U high.
483mm wide x 88mm high x 200mm deep.
Shipping Weight:
6Kg.
T he above specifications are subject to change without notice.