Specifications, If you think there is a failure – Toa WT-2100 User Manual
Page 4

10. SPECIFICATIONS
Note: The design and specifications are subject to change without notice for improvement.
• Accessory
Neck strap .................................................. 1
Power Source
1.5 V DC (Battery)
Receiving Frequency
470 MHz band (5 ch)
470.075, 470.150, 470.375, 470.625, 470.725 MHz
Receiving System
Double super-heterodyne
Receiving Sensitivity
Better than 25 dB S/N ratio (7 dBμ VEMF input, ±1.7 kHz deviation)
Frequency Response
200 – 5,000 Hz (Portable transmitter
Portable receiver)
150 – 6,000 Hz (Desk-top transmitter
Portable receiver)
De-emphasis 50
μs
Output Level
4 mW (16 Ω load, 10% distortion)
Battery Life
18 hours (alkaline)
Battery
LR6 (1.5 V) x 1
Ambient Temperature
–10 to 40°C
Finish
Resin, dark silver
Dimensions
62 (w) x 163.6 (h) x 32.5 (d) mm
Weight
112 g (battery included)
Symptom
Power is not switched on.
Cause
Battery is exhausted.
Remedy
Replace with new battery.
Incorrect battery polarity connection.
Remove and reinsert battery.
Receives no radio signal even
when distance to transmitter
is short.
Operation/battery indicator is
flashing slowly.
Channel selector switch is not set
the same channel as transmitter.
Set Channel selector switch to the
same channel as transmitter.
Receives no radio signal even
when distance to transmitter
is short.
Operation/battery indicator
remains steadily on.
Earphone plug is not fully inserted.
Fully insert earphone plug.
9. IF YOU THINK THERE IS A FAILURE
URL: http://www.toa.jp/