Toa CR-413 - Manual (Page 9)

9
Step 3. Install the top and base covers.
Note
As a protection film is attached to each cover to prevent it from being scratched and stained, remove
it after installation completion.
Bind head taptite screw type B 4 x 10
Bind head taptite screw type B 4 x 10
Bind head taptite screw type B 4 x 10
Top cover
Base cover (front)
Base cover (rear)
The figure shows the CR-413.
Screws used Bind head taptite screw type B 4 x 10 ..... 14 pieces