23 english, Selecting the equalizer mode (eq select) – Clarion HX-D2 User Manual

Page 19

Advertising
background image

HX-D2

23

English

Operations Common to Each Mode

Saving the filter setting/time
alignment setting/P.EQ setting
(MEMORY)

Three groups of adjustment settings made to
suit your car can be saved for both the Standard
mode and Multi mode.
∗ P.EQ settings are not saved when the Equalizer

mode is set to "BASS/TREB".

1. Press the [ADJ] button.

2. Press the [

] or [

] button to select

"SOUND".

3. Press the [

s] button.

4. Press the [ ] or [ ] button to select

"MEMORY".

5. Press the [

] button.

6. Press the [ ] or [ ] button to select

"MEMORY1", "MEMORY2", "MEMORY3" or
"DEFAULT".
∗ The factory default setting is "DEFAULT". This

setting can be called up but cannot be
changed to other settings.

7. Hold down the [

s] button for about 1

second. "SAVE?" is displayed.

8. Hold down the [

s] button for about 1

second. You will hear a short high-pitched
sound, and the filter settings, time alignment
settings and P.EQ settings are saved to the
memory (1 to 3) selected in step 6.

9. Press the [ADJ] button to return to the

previous mode.

●To call up saved settings
At step 7, press the [

s] button, and hold

down the [

s] button for about 1 second when

"LOAD?" is displayed.

You will hear a short high-pitched sound, and
the settings are called up. Press the [ADJ]
button to return to the previous mode.
∗ When the Equalizer mode is set to "BASS/TREB",

the P.EQ settings that are called up are reflected
when the Equalizer mode setting is changed to
"P.EQ".

●About settings after a reset
When the [RESET] button is pressed to reset
this unit, all settings set here disappear. Make a
note of the settings in the Sound Setup Memo
(page 34) to make these settings again after a
reset.

Selecting the equalizer mode
(EQ SELECT)

This item can be selected when the Audio mode
is the Standard mode or the Multi mode.

The factory default setting is "P.EQ".

●Parametric equalizer mode <P.EQ>
The sound field can be adjusted by the P.EQ of
five bands. For details on P.EQ adjustment, see
"Adjusting P.EQ" (page 21).
●Bass/treble mode <BASS/TREB>
The sound field can be adjusted by bass/treble.
For details on bass/treble adjustment, see
"Adjusting the bass/treble" (page 12).

1. Press the [ADJ] button.

2. Press the [

] or [

] button to select "EQ

SELECT".

3. Press the [ ] or [ ] button to select "P.EQ"

or "BASS/TREB".

4. Press the [ADJ] button to return to the

previous mode.

Setting the sub-woofer/non-fader
(SUB-WOOFER/NON-FADER)

Set to "ST" (stereo) or "MONO" (monaural)
when a sub-woofer/non-fader is connected.
There is no output when "OFF" is set.

* The factory default setting is "ST".

1. Press the [ADJ] button.

2. Press the [

] or [

] button to select "SUB-

WOOFER" or "NON-FADER".
∗ Select "SUB-WOOFER" when the Audio

mode is the Standard mode or the Multi mode,
and "NON-FADER" when the Audio mode is
Direct mode.

3. Press the [ ] or [ ] button to select "ST"

(stereo), "MONO" (monaural) or "OFF".

4. Press the [ADJ] button to return to the

previous mode.

Advertising