Toa VX-200SZ-2 - Manual (Page 12)

12
6.2. Installing the VX-200SE in the VX-200SZ-2 and VX-200SP-2
• A 9-band, single-channel equaliser function can be added by installing the VX-200SE Equaliser Card in the
VX-200SZ-2 Impedance Detection Module or the VX-200SP-2 Pilot Tone Detection Module.
• In the PC software settings, "EQ" must be set to ON for the VX-200SZ-2 and the VX-200SP-2 in which the
VX-200SE is installed. For details, refer to the VX-2000 series Instruction manual.
• Use the PC software to perform equaliser setting. For details, refer to the VX-2000 series Instruction manual.
VX-200SP-2 or VX-200SZ-2
VX-200SE