Toa M-864D Ver.2.0.0 - Manual (Page 5)

Digital stereo mixer M-864D
TOA Corporation 5/17
88H, 03H, 00H, 02H, 01H
Input Matrix Assignment
Set the input matrix assignment (matrix crosspoint) to ON or OFF.
The M-864D transmits changed value data after receiving this command.
94H, 04H, <Source Channel Attribute>, <Source Channel Number>, <Bus Channel Number>,
<ON/OFF>
<Source Channel Attribute>
00H: Mono In channel
01H: Stereo In channel
<Source Channel Number>
When Source Channel Attribute=00H: 00H - 07H (Mono In channel 1 - 8)
When Source Channel Attribute=01H: 00H - 01H (Stereo In channel 1 - 2)
<Bus Channel Number>
00H - 03H (Bus channel 1 - 4)
<ON/OFF>
00H: <Source channel> to <Bus channel> assign OFF
01H: <Source channel> to <Bus channel> assign ON
Example of setting the bus assignment from Mono In channel 1 to bus channel 1 to ON:
94H, 04H, 00H, 00H, 00H, 01H
Input Matrix Crosspoint Gain
Set the crosspoint gains by position.
The M-864D transmits changed value data after receiving this command.
95H, 04H, <Source Channel Attribute>, <Source Channel Number>, <Bus Channel Number>, <Value>
<Source Channel Attribute>
00H: Mono In channel
01H: Stereo In channel
<Source Channel Number>
When Source Channel Attribute=00H: 00H - 07H (Mono In channel 1 - 8)
When Source Channel Attribute=01H: 00H - 01H (Stereo In channel 1 - 2)
<Bus Channel Number>
00H - 03H (Bus channel 1 - 4)
<Value>
00～46H : For the relationship of position to gain (dB), refer to Value vs. Gain Table for crosspoint gain.
60～6FH : Position Down (1～16 Step Down)
70～7FH : Position Up (1～16 Step Up)
Example of setting the crosspoint gain from Mono In channel 1 to Bus channel 1 to 0dB: