Toa S-20S Ver.4.01 - Manual (Page 43)

43
12.4. Activating the EV-20A
Click the Start button to activate the EV-20A after making settings or read/write operations on this software
program.
Note
Leave the EV-20A's Record/Play Selector Switch in the right position (playback mode) in advance.
Step 1. Click the Start button.
The EV-20A operates in the status set at the unit.
Tip
The EV-20A operates independently of data selection in the audio data area.
Step 2. To interrupt the unit operation, click STOP.